Viture Pro 2

4.0 / 5 Very good

Pros & Cons

  • Brightness increased to 1,600 nits
  • Prescription-free integrated diopter dials
  • Weighs 63 grams
  • Improvements in four eye comfort areas
  • Affordable
  • Physical lens shade required for optimal viewing
  • No 3DoF support

Just about everyone I’ve shown these XR glasses to has bought a pair of their own. The new Viture Pro 2 offer a portable big-screen media experience comparable to more expensive pairs, making them one of the best entry-level models I’ve tested.

Don’t get me wrong, Virture’s pair of flagship XR glasses, the Beast are incredible, but they’re expensive, starting at $549. The Virture Pro 2 are much more reasonable at $299 and provide excellent eye comfort in ways you have to try on and use to validate. 

Also: The best AR and MR glasses in 2026: Expert tested and reviewed

Using SpaceWalker on my new iPhone Duo with the Viture Pro 2Matthew Miller/ZDNET

Focus on eye comfort

Viture’s engineers spent a considerable amount of time optimizing the viewing experience on the Viture Pro 2 while keeping the cost low enough for everyone to enjoy the thrill of XR glasses. These are the four areas that Viture optimized on the Pro 2:

Field curvature: The edges of the screen, viewed through the glasses, were pulled slightly closer to the viewer. This design approach mimics the wrap of a curved screen and attempts to provide a smoother transition for your eyes as they move across the display.

Spot RMS: The root mean square (RMS) of the blur spot was addressed by building in astigmatism into the target. The result is that horizontal lines and vertical lines are equally sharp so that one direction is not favored by your eyes, which can result in eye fatigue.

Also: These XR glasses gave me a 152-inch screen to work and travel with – and I can’t go back

Distortion: In the original Viture Pro, distortion was optimized around the -1D diopter setting with some residual at the extremes of the dial. Viture worked to optimize the entire range on the Pro 2 to reduce distortion for all users.

Pupil-offset stability: Our eyes have different interpupillary distance (IPD), and when you glance towards an edge of an image, your pupil leaves the center. Viture worked to optimize the Pro 2 across many different pupil-offset conditions to keep the image in place as your eyes move.

Basic hardware

Good quality Sony lenses offers a clear visual experienceMatthew Miller/ZDNET

One of the first design elements I noticed is the thin profile, which is clearly visible when viewing the glasses from the top and when setting them next to other glasses, like the Viture Beast. This makes the glasses appear more similar to sunglasses when worn and also lightens the load on your nose. Despite the thin design, visuals are still very good.

Also: I wear XR glasses every day on my commute – Why Xreal’s latest pair is my new main driver

Brightness is an important element in XR glasses, and despite the Pro 2’s entry-level price, Viture bumped the brightness from 1,000 nits on the Pro to 1,600 nits on the Pro 2. Position the included lens shade over the glasses for a more immersive experience.

The Viture Beast (top) is much thicker than the Viture Pro 2 (bottom)Matthew Miller/ZDNET

The Viture Pro 2 also has a large FOV of 50 degrees and 1080p resolution. The glasses use Sony Micro-OLED lenses in the Pro 2, with all of the engineering resulting in a feature called UltraClarity 3.0. The full image moves with you since 3DoF is not supported, so you can’t anchor or enable smooth follow.

Unlike the Viture Beast and other Viture models, there are only two buttons on the bottom left side of the glasses. There is no on-screen display for settings, with the long button adjusting brightness and volume while the smaller button switches between these two options. Press and hold the small button to switch into 3D mode when using SpaceWalker on your connected device.

Two buttons, one short and one long, control the basic functionsMatthew Miller/ZDNET

No prescription needed

For a few generations, Viture’s XR glasses all included diopter dials. Its more expensive models no longer include this option and instead rely on prescription lens inserts. For those of us who are nearsighted, the convenience of taking off your glasses (for me, this means taking out my contacts) and rotating the two dials to use the glasses was perfect. I find this approach particularly useful for long flights where I tend to remove my contacts and want to use my XR glasses to watch movies.

Also: I compared the 3 best XR display glasses right now – the winner was not the most expensive

There are right and left dials on the top of the glasses that let you adjust for myopia up to -5.0D. This may not work for some people who have stronger prescriptions, but it’s perfect for my eyes. XR glasses with prescription inserts are great if you wear glasses all of the time, but if you wear contacts and want to take them out, it’s a bit of a hassle to carry around inserts to mount and unmount them from the XR glasses.

SpaceWalker support

Even though the Viture Pro 2 is priced at just $299, the glasses get enhanced functionality through the SpaceWalker phone and desktop apps. With SpaceWalker on your phone, you can enable 3D viewing with a simple press-and-hold of the small button at the bottom left of the glasses when you launch a 3D content source. Your smartphone serves as a laser pointer to navigate around inside the SpaceWalker interface.

The included lens shade blocks out ambient light for a more immersive experienceMatthew Miller/ZDNET

The SpaceWalker desktop application supports various viewing modes when you connect the Viture Pro 2 via a USB-C port on your Apple or Windows computer.

Final thoughts

If you like watching movies on your phone (especially when on a plane), you should seriously consider trying XR glasses. Viture’s new Pro 2 are an excellent entry-level pair that makes the whole experience accessible at $299, while offering a viewing experience comparable to more expensive models.

I’ll be sticking with the flagship models since I spend many hours using my XR glasses for work and play, but these are more than good enough for most people. If you wear prescription glasses and want to enjoy XR, the easiest way is to use ones like the Pro 2 with diopter dials so a separate prescription lens insert is not needed.