Adrian Kingsley-Hughes/ZDNET
Rision Magic Pro thermal imager
4.5
Pros & Cons
- Upgraded 512 x 384 pixel resolution for those who need it.
- Good thermal range and accuracy.
- Can differentiate temperatures by as little as 0.04°C.
- Connects via USB-C to iOS, Android, or Windows devices.
- At the high-end for a consumer/prosumer thermal imager.
- Most users will be fine with the cheaper model.
- Doesn't work with Mac or Linux devices.
Just when I think thermal camera dongles can’t get any better, they do. I just tested the Rision Magic Pro, and it’s a prosumer-grade thermal sensor that attaches to your smartphone or Windows PC for under $250.
Also: This tiny tool gave my phone thermal vision – and powerful diagnostic superpowers
This device might sound familiar to regular readers, because I’ve reviewed its smaller sibling, the Rision Magic thermal camera. While the Pro version shares a lot of similarities with the Magic, it differs in one critical area — the sensor.

That’s a sharp image
A thermal camera is like any other camera: the better the sensor, the better (and more detailed) the image. The Magic Pro has a 256 x 192-pixel resolution sensor that can be digitally upscaled to 512 x 384 using the QuadIR feature. Compare this to the 160 x 120-pixel native resolution and 320 x 240 QuadIR upscaled resolution of the regular Magic camera.

That’s more than two and a half times as many pixels for the Magic Pro compared to the Magic. But is it worth paying an extra hundred dollars for a bunch of extra pixels? While the marketing folks want you to go for the upsell, I’m going to go with a more reasonable “it depends on what you use your camera for.”
Also: This USB-C dock can be managed remotely (with a feature IT will love)
Thermal cameras are so versatile, they can be used for all sorts of applications. I’ve used them to track down drafts and problems with insulation, look for damp ingress, check breaker panels, plugs, sockets, and cabling for overheating. It’s great for machinery and gadget diagnostics too, and I’ve used mine to carry out all manner of automotive diagnostics (from spotting a cylinder misfire to finding out why a battery is draining) as well as examining circuit boards for failing components.

For some things, the extra pixels don’t matter, while for others they do, and it all comes down to resolution, target distance, and target size. A general rule of thumb for thermography is that whatever is being measured should cover at least 3 x 3 pixels for a reliable reading. And the size of an object that covers those 3 x 3 pixels varies based on distance — the closer the object, the smaller it can be. Those extra pixels only really come into play when the thing you’re inspecting is small or far away.
Let’s compare the Magic to the Magic Pro. Both cameras have the same 52° x 39° lens, so each Pro pixel covers a smaller patch of the scene, resulting in finer resolution.
Also: I tested Anker’s air-cooled power bank with a thermal camera – here’s the result
For the Magic Pro, a 3 x 3-pixel patch is under half an inch square at a yard, and just over two inches square at five yards, while for the Magic, those would be about two-thirds of an inch and three and a quarter inches, respectively. If you want to crunch the numbers yourself, there’s an online calculator you can use here.

So, if you’re looking for drafts or a damp patch in a wall, there’s little point paying for the extra pixels. But if you’re after component-level resolution when imaging a circuit board, or you want to be able to spot a single overheating breaker without getting close to it, then pay for the pixels.
Beyond the pixels
Looking beyond the image quality, the Magic Pro has some decent pro-grade specs for a consumer-grade thermal imager. It has a measurement range of -4°F to 1,112°F (-20°C to 600°C) with ±3.6°F (±2°C) accuracy and a thermal sensitivity (the smallest temperature difference the camera can distinguish from its own background noise) of 40mK (or 0.072°F).
Also: I tested Anker’s air-cooled power bank with a thermal camera – here’s the result
Thermal cameras don’t measure an object’s temperature directly. Instead, they take a reading of the infrared light emitted by a surface, and use it to determine a temperature. How well a surface gives off infrared is called its emissivity, and the software allows you to pick different presets, which are essentially correction factors to plug into the math so that it lets the software turn an infrared reading into a temperature.

I’ve tested the Magic Pro on several different surfaces, and I got readings that are close to those from a high-end FLIR thermal imager. The software allows you to take a variety of readings, from a single spot or multiple points to an area or along a line.
Final thoughts
At $250, the Rision Magic Pro is definitely the pricier option. However, it’s often on sale, and is at the time of writing. If you need the improved resolution, then it’s a case of “buy once, cry once” and pay the money now; otherwise, you’ll buy something that isn’t what you actually need and buy what you need later down the line.
Overall, the casual home DIYer or even a tradesperson will probably be fine with the more affordable Magic.